Silk Road forums
Discussion => Off topic => Topic started by: Darktime on May 19, 2013, 10:43 am
-
Am thinking of giving tina a try but dont really want to buy a pipe just for what will hopefully be a rare occation(I know that shits addictive)
could i use a crack pipe or run it on tin?maybe knock the end off a lightbulb IDK?
-
You haven't tried meth before and you wanna go straight to smoking? You should snort a bump of it first to get a feel for it. Then you can try chasing some of it off foil. Thick steel foil works better than thin aluminum foil.
-
"hopefully be a rare occation"
buhahahahahhaaa. Good luck with that one boss.
-
You can easily make a smoking device out of a light bulb instructions all over the net.
-
insulin syringe or you aren't man enough to do it?
-
Tin foil is just fine... it's really easy. The whole idea is to make a channel that the meth will run down when it melts so that it doesn't get too hot. So you keep the foil tilted a bit to help with that and just kinda chase the smoke with a straw or something -- except straws tend to melt.
It's a lot easier than it sounds. When you get to the end of the foil, flip it around and repeat. Supposedly called "running the highway" and "chasing the white dragon" or some shit, but I've never met anybody who actually calls it either of those.
-
You can easily make a smoking device out of a light bulb instructions all over the net.
Yeah.^ Smoking from a lightbulb with a straw is way better than tin foil.
If you want to smoke it, go lightbulb. Just don't open up a CFL lightbulb or you'll be smoking mercury which is flat out poison.
Eating it is the most efficient way to consume it. Wrap a bump up in a little square of printer paper and swallow like a pill.
Or snort a line, which burns like hell.
I really don't recommend slamming it with a syringe. SWIM's personal experience with that was awful and if you're inexperienced with it, it's really dangerous. Plus it's a really different high.
-
Thanks for all the constructive advice folks.I think I might chase it to start now Aktion pointed out the mercury in bulbs :S
GRDR it doesnt take a man to stick a needle in him/herself as i do it everyday,not saying im not a man though ;)
Selfsovereignty,thanks for the advice but before i was pinning I had a few years practice running shit on the foil
Its really quite rare here in the UK which is why I dont know much about it.You would think the country would be awash with it but quite the opposite.That rare that I tried making some a few years ago but fkd it up somewhere down the line and now the government has taken the active ingredient out of sudafed so havnt bothered since.need someone to show me how to do it properly and i could make a fkn fortune here!
-
It's only the energy efficient light bulbs (cfl bulbs) that contain mercury. Regular round bulbs are fine. ;D
Just remember that you want to smoke vapor and not actual smoke.. and it turns to liquid real fast. Careful not to burn it or it's a waste. :)
Either way good luck and enjoy the ride ;)
-
A DMT pipe.
-
A DMT pipe.
BY that do you mean 'the machine'.
I'm in a similar situation as Darktime, in the UK Meth is pretty much non existent - and I've just ordered a tiny bit to see what all the fuss is about. I have no contacts in the UK to get Meth and it is very rare over here.
I'll probably go down the foil route as like Darktime I've had a few years experience of 'chasing the dragon' before I moved onto the pin - however, I don't fancy sticking meth in me via IV the first time I use it.
The lightbulb seems feasible - but I don't wanna fuck it up and waste it!
I take it smoking on the foil would be identical as you would smoke H on the foil?
Thanks in advance for any advice.
-
A DMT pipe.
BY that do you mean 'the machine'.
I'm in a similar situation as Darktime, in the UK Meth is pretty much non existent - and I've just ordered a tiny bit to see what all the fuss is about. I have no contacts in the UK to get Meth and it is very rare over here.
I'll probably go down the foil route as like Darktime I've had a few years experience of 'chasing the dragon' before I moved onto the pin - however, I don't fancy sticking meth in me via IV the first time I use it.
The lightbulb seems feasible - but I don't wanna fuck it up and waste it!
I take it smoking on the foil would be identical as you would smoke H on the foil?
Thanks in advance for any advice.
you're more likely to burn it on foil than on a bulb. thing is, unlike heroin, meth turns into proper watery liquid once it's heated so the foil technique is a little trickier.... you need to make sure that it won't trickle off the foil. I personally didn't like fucking around with foil.
-
I have smoked DMT off of tin foil as well. It works, it liquifys and is a little tricky. The concept is the same as smoking meth though. You are just trying to vaporize it. Get a HealthStone glass slide and that will work for oil, and DMT/Meth in any bong. Just be sure to dump out the water for the Deams or tweak.
On a side note I do not condone doing Meth via any ROA.
-
2 words hot rails
-
I get what your all saying is that the meth turns to a very viscous liquid when heated so will run off the foil easily unlike h which is pretty easy to control.I might just get in the shed and construct something from a lightbulb then.
Also from what ive seen,everyone uses a turbo lighter.is it because its a cleaner flame or hotter? the normal lighters leave lots of soot but turbos are no good for foil cos it rips it up.
-
I get what your all saying is that the meth turns to a very viscous liquid when heated so will run off the foil easily unlike h which is pretty easy to control.I might just get in the shed and construct something from a lightbulb then.
Also from what ive seen,everyone uses a turbo lighter.is it because its a cleaner flame or hotter? the normal lighters leave lots of soot but turbos are no good for foil cos it rips it up.
I'm shit at DIY!!
I'm just wondering how hard it would be able to control it on the foil - perhaps turn the edges up so in effect you have a box type shape so it can't run off the edge??
Plus - can anyone answer the question whether a DMT 'Machine' would work with very thick brillo wire in it?
Sorry for the questions but us Brits are clueless about Meth!!! It seems to be a US drug mainly...
-
Tin foil is poo. I used to make pipes out of lightbulbs all the time, that's probably your best bet. It may take a few bulbs for you to get a useable one, however... I've been thinking about making a video demonstrating how to make a proper one (or at least how I used to make mine) but it might be useless information.
EDIT:
Also, some people may disagree, but I've been smoking meth for close to 2 years now and I have always used a normal Bic lighter. I think it would be difficult to keep your pipe completely clean when using it, as you can see mine does get a little black, but it's best not to touch the flame to the glass to avoid burning your gear and keep the black marks off your pipe. The picture below demonstrates about where I hold my lighter when smoking.
http://www.anony.ws/i/2013/05/20/hCLOx.png
-
I get what your all saying is that the meth turns to a very viscous liquid when heated so will run off the foil easily unlike h which is pretty easy to control.I might just get in the shed and construct something from a lightbulb then.
Also from what ive seen,everyone uses a turbo lighter.is it because its a cleaner flame or hotter? the normal lighters leave lots of soot but turbos are no good for foil cos it rips it up.
It really isn't hard; it is a viscous liquid, but it's kind of like... well, it's actually a lot like hot maple syrup that you just take out of the microwave or something. It's a lot easier to use foil than it seems.
It really is more efficient to use something else and a light bulb is awfully easy with just a pair of pliars, but I've seen more than a couple of people who prefer foil.