Hey guys, I've got some advice for everyone trying to remove their tar from the plastic baggie. This stuff is pretty sticky so if you do not take it off right you lose some product to the bag, which is frustrating as hell. It frustrates me as a vendor, I can only imagine how much it frustrates customers! Anyhow there is a way to do this so you lose ZERO product. I'm writing to share. The key is to understand that while at room temperature (especially in the summer) this stuff is sticky but when it's cold its rock hard. So here's what you do (slightly different than my prior instructions): 1) Cut off all four sides of the dope bag with scissors. 2) Turn freezer temperature down from "cold" to "really fuckin cold" 3) Put in freezer for 5 minutes for 1gm (10 minutes for 2-3 grams) 4) take put and you should be able to remove one of the two sides of plastic with NO loss of tar. Now here's the key: You have to realize that there isn't much mass here so handling this stuff even for 10 seconds warms it up and makes it sticky. So you have to put it back in the freezer to get it cold to get the other side off. So.. 5) put the tar on something flat you can scrape it off of with a razor blade, a mirror is ideal 6) put it back in the freezer for 5 minutes 7) Take it out and peel the other piece of plastic off Remove from the mirror using a razor blade if necessary. The mirror and the razor blade are only required in the worst cases. You can usually just stick it on a dinner plate and dont press it down hard as the plastic will come off easily. But if it's stubborn smooshing it on to a mirror will work. Nod