Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - indica9

Pages: 1 2 [3] 4 5 ... 10
31
Product requests / Re: Ether Request
« on: May 09, 2013, 05:51 am »
fear & loathing in las vegas

32
Product requests / Re: ERGOT CULTURE, or ergot derivative
« on: May 09, 2013, 05:49 am »
if you think the dea cant pressure people in other countries than your fucklng pretty dumb.

your not gonna waste their time. they will just make them stop offering it.

people like you fuck everything up for people that are actually doing things and not chatting about them on SR forums like a bunch of fucking teenage girls. If you want to learn about LSD then pick up a fucking book.

DEA can take a good look at ur butt while we figure this out,lol, Silkroad is all about freedom and not for couple of faggots  who thinks they can run the show behind a curtain, and its pathetic that people from states thinks dea is everything, fuckall mate grow up ,

people like us make it easier and clear for the people who really has balls to do it, lets call it evolution of drugs and we believe collectively we can do the humanity a favour by spreading more lsd u are a pussy no doubt or le himself, go fuck urself mate

33
Product requests / Re: ERGOT CULTURE, or ergot derivative
« on: May 08, 2013, 10:15 pm »
you chatty cathys never really take the time to think ahead do you?

Do you know how sources get fucked off? by talking about them.

Do you know the exact reason why the DEA was created? The Brotherhood....

If theres any sources in this thread that are real, by posting about them here, you have ensured they will be more than trip-wired now. good job. good luck.

we believe its the freedom of humanity to get educate ourselves on the interesting fields even though they are illegal and again even with the dea around still we get all the drugs we need,lol and its just usa and there are many places in the planet the dea doesnt have a clue about what the shit is cooking

and sharing ideas makes the process simpler and obviously dea needs to recruit/spend more people/time/resources to check on the new avenues, its fun isnt it to keep the pigs busy??


anyways the ergot still can be freely find in many rye,wheat and bhai grass fields growing without no ones intervention and dr.kim yes still u can get ur hands on ET with paper money if u have proper contacts, heard most of blackmarket et  comes out from czech republic


34
Hydroxalamine how much per kg ? Ethyl benzo ate 25 litres

Hydroxalamine HCL will do a key for usd 450 with multiple shipping


35
Product requests / Re: ERGOT CULTURE, or ergot derivative
« on: May 08, 2013, 06:58 am »
if u can front a research & development company in third world or not much restricted/developed country there are few companies in deutsche and swisterland where u can obtain a culture sample legally and the best bet is grow ur own ergots,

at the time hoffman carried it out LSA can be legally bought and the ET too, and if u get a time read operation julie and brotherhood of eternal love which tells how those guys got their hands on the ergot

now the synthesis are getting much easier with new methods such as casey hardisons peptide coupling method, kemps wrinkle cleaning mechanism and many more

i have loads of good reads on the above subject i will be happy to share them and we can definitely sond very source out the chemicals and the precursors  and very soon et, lol

36
Rumor mill / Re: Best Opium on the Silk Road
« on: May 06, 2013, 07:52 pm »

@indica

what up homie??
just curious.. what's your US shipping success rate??

to US its very good and us domestic vendor pharmacare was reselling our opium while ago

37
Product requests / Re: ERGOT CULTURE, or ergot derivative
« on: May 06, 2013, 07:27 pm »
I would love to see a culture or ergotamine as well, but lets face it; who would go through the trouble of obtaining some ergotamine to only sell it if you can get the profit from a simple reaction and workup ?


i still heard underground a gram of ET goes for around usd700 and the simple industrial setup can yield half a key every twenty days mate, and lot of advantages are there for choosing paspali instead of purpurea

38
Product requests / Re: ERGOT CULTURE, or ergot derivative
« on: May 06, 2013, 06:34 pm »
Me no chemist but to whoever doing a research on this field i think this will surely help


A)   Get a source for Claviceps Paspali

B)

L-tryptophane and succinamide have great effect on fermentation.

The best composition of culture medium is 7% sorbitol, 3% succinamide, 0.1% L-tryptophane, 0.05 %MgSO4•7H2O, 0.03% KH2PO4 and pH 5.2 adjusted with ammonia. Through the cultivation of 14 days at 24-26℃ in shake flasks, the biggest content of the ergot alkali reaches 95.6 mg/L

C) Large-scale production

Obtain several ordinary 1 gallon jugs.
Place a two-hole stopper in the necks of the jugs.
Fit a short (6 inch) tube in one hole, leaving two inches above the stopper. Fit a short rubber tube to this. Fill a small (500 ml) Erlenmeyer flask with a dilute solution of sodium hypochlorite (NaClO). Extend a glass tube from the rubber so the end is immersed in the hypochlorite.
Fit a long glass tube in the other stopper hole. It must reach near the bottom of the jug and have about two inches showing above the stopper. Attach a rubber tube to the glass tube and fit a short glass tube to the end of the rubber tube.

Fill a large glass tube (1" x 6") with sterile cotton and fit one-hole stoppers in the ends. Fit the small glass tube in the end of the rubber tube into one stopper of the large tube. Fit another small glass tube into the other stopper. A rubber tube is connected to this and attached to small air pump (obtained from a tropical fish store).
With this aeration equipment you can assure a supply of clean air to the Claviceps Paspali fungus while maintaining a sterile environment inside the solution.
Dismantle the aerators. Place all the glass tubes, rubber tubes, stoppers and cotton in a paper bag, seal tightly with wire staples and sterilize in an autoclave.
Fill the 1-gallon jugs 2/3 to 3/4 full with the culture medium and autoclave.
While these things are being sterilized, homogenize in a blender the culture already obtained and use it to inoculate the material in the gallon jugs. The blender must be sterile.

EVERYTHING must be sterile.

Assemble the aerators. Start the pumps. A slow bubbling in each jug will provide enough oxygen to the cultures. A single pump may be connected to several filters.
Let everything sit at room temperature (25 C) in a dark place (never expose ergot alkaloids to bright light - they will decompose) for a period of ten days.
After ten days, adjust the culture to 1% ethanol using 95% ethanol under sterile conditions. Maintain growth for another two weeks.

D) Extract ergot alkaloids

After a total of 22 days growth period, the culture should be considered mature. Make the culture acidic with tartaric acid and homogenize in a blender for one hour.
Adjust to pH 9 with ammonium hydroxide and extract with benzene or chloroform/iso-butanol mixture.
Extract again with alcoholic tartaric acid and evaporate in a vacuum to dryness.
The dry material is the salt (the tartaric acid salt, the tartrate) of the ergot alkaloids, and is stored in this form because the free basic material is too unstable and decomposes readily in the presence of light, heat, moisture, and air.
To recover the free base for extraction of the amide or synthesis to LSD, make the tartrate basic with ammonia to pH 9, extract with chloroform, and evaporate in vacuo.

39
will be shipping from outside europe and pm m eon sr on DiPT,


No ET yet mate but very soon will be able to

40
We have listed following precursors for ur research needs and we have access to various scheduled chemicals and can ship discreetly worldwide, please send us a pm so we can cater ur need,

HYDROXYLAMINE.HCL (H4ClNO)

http://silkroadvb5piz3r.onion/silkroad/item/1762e082d6

SODIUM IODIDE ( NaI)

http://silkroadvb5piz3r.onion/silkroad/item/c8184a248b

SODIUM BROMIDE (NaBr)

http://silkroadvb5piz3r.onion/silkroad/item/64a555b851

cheers

41
Rumor mill / Re: Best Opium on the Silk Road
« on: May 05, 2013, 11:29 pm »
Does anyone know what is going on with Numberfive? I went on his page and he has no listings, on to of not signing on in 4-5 days? Is he restocking or has he disappeared?

Hey!!! Welcome back OP  8)

Don't know the answer to your question but thanks for the awesome thread  :-* :-*

Its good to be back, thank you. I have been incredibly busy of late and, at least for a short while, my computer was relatively to severely incapacitated. Luckily, the silk road is back up in running just as the last of Numberfive's opium went up in smoke, literally. I'm very intrigued with Scurvy Crew at the moment and I would be happy to write a review, comparing it to Charas's, Drugstores, locally grown from Persian Whites, and Numberfive's multiple batches once I get an opportunity to place an order. What do you all think? How does the Bayer stand up to the spanish for euphoria?

if ur willing to write a review on our opium we would be very happy to offer u a free sample and for keeping this thread alive , send us a pm mate

42
Rumor mill / Re: Ketamine Vendors and Reviews
« on: May 05, 2013, 11:06 pm »
our ketamine listing is back up, grab it while it lasts, and we have reduced the price to usd 33 a g

http://silkroadvb5piz3r.onion/silkroad/item/ff8e826112

43
Silk Road discussion / Re: under attack again
« on: April 29, 2013, 09:50 am »
i got the access just now, is everything ok??

44
i would love to test out some good cid , its not clear yet do i have to order something else from u to get this sample mate??

and believe me im one of ur bigger customers.lol

45
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: April 18, 2013, 02:06 pm »
sorry missed out a part-

Step II. Use Red light”
after you have run your lysergic acid through a column and are at the point of peptide coupling, you will want to switch to a red photographic safe light, which willbe used in any purification or further processes from this point onward. As always it is a good idea to simply let it stir in the dark.
 
“2.80 grams of lysergic acid was added to 100 ml of magnetically stirring dichloromethane. Tothis was added 1.81 grams
N,N
-diethylmethylamine and the solution was allowed to stir forfive minutes. Then 5.70 grams of PyPOB was added and the solution was allowed to stir for anadditional five minutes. Then 0.84 grams of diethylamine was added and the reaction wasallowed to stir at RT(room temperature) for 60 minutes.The reaction mixture was quenched with 100 ml of 7.5M concentrated ammonium hydroxide,the layers were separated and the aqueous phase was then thrice extracted with 30 ml
 

dichloromethane, the organic layers were combined and rotary evaporated at 35°C under highvacuum.The residue was dissolved in 40 ml of cold saturated sodium bicarbonate and extracted thricewith 20 ml ethyl acetate, the organic layers were combined and washed with deionized H
2
O,brine, and then dried over magnesium sulfate, filtered and rotary evaporated at 40°C underhigh vacuum to a constant weight. Yield 3.13 grams before chromatography, 93%.Another run of 5.12 grams lysergic acid with the same amines, equivalents, and times, yielded 5.55 grams after chromatography, 9”


all the best bro
[/quote]

Pages: 1 2 [3] 4 5 ... 10