Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - DrDeepWood

Pages: 1 2 3 [4] 5 6 ... 13
46
Newbie discussion / Re: Diethylamine and Acetic Anhydride
« on: February 03, 2013, 12:46 am »
The only tools needed are a flask, stopper and high temperature tube, much much easier than making diethylamine or most other things for that matter.

But good luck, I am worried nobody is gona want to ship those stinky compounds to you.  If they have them, that means they have better things to do than make a few bucks mailing some.

47
Newbie discussion / Re: Free Legal Help Right Here!
« on: February 02, 2013, 11:30 pm »
I have a question about my area of expertise. 

Many people worry that if they order chemicals online, or buy them from a local chemical distributor and even if those chemicals are in no way illegal or listed, that they can arouse suspicion

My understanding is that unless you order a drug precursor or one of a set of lists, no warrants can be gotten or anything.  Did this change post 9/11? In my extended experiance, like you said, the dumb criminals keep the cops busy.

P.S. If you can prove that the money goes toward someones bail/services I will donate a few hundred.

48
I am interested to know what you are selling, that would be a good starting point for everyone...
Are you an MD? How much trauma care experience do you have? What is your specialization?

I have some questions ranging from bullet wound trauma care to biomechanics of the human body for martial arts.

49
Newbie discussion / Re: Diethylamine and Acetic Anhydride
« on: February 02, 2013, 11:06 pm »
I sell guides that include how to make acetic anhydride and how to get diethylamine. 

50
Product requests / Re: Plastic or black cocaine
« on: February 01, 2013, 07:57 am »
I can help you out.  But all drug agents know this trick and its not as good as it used to be.  I do have the formula and method tho.
I have a method that can beat drug dogs and X-rays, believe it or not.
Can work on anything from 1 gram to 10kg.

51
Rumor mill / Re: Cocaine Lab Test Results
« on: February 01, 2013, 07:51 am »
This is very interesting, good work!!

I think what you will find, especially in the case of cocaine is that active cuts even at lower percentages completely change the feeling, for better or worse.  The purest cocaine is much different feeling than street cocaine, its very chill and social like coke was meant to be, but some people prefer the speedy clampjaw feeling of cocaine with active cuts.

You may find that some people prefer cocaine with small amounts of active cuts, there is complex pharmacological symbiosis if active cuts are used "correctly".

52
Rumor mill / Re: Ron Paul has been absent for 2 days..
« on: January 30, 2013, 06:29 am »
Am I not allowed a vacation?

It was actually a big event, first time I did not answer all messages within 24 hours
But im back and not going anywhere

53
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: January 27, 2013, 02:38 am »
Looks like motek finally fucked off

54
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: January 24, 2013, 07:29 am »
there WAS nothing to argue 'other than' the fact I didn't believe this was a "good or fair deal"

Did you really need 3 pages, a lot of shit slinging and a bucketful of smiley faces to do that?


Sure looks like that wasn't the case earlier when you accused me of a bunch of shit, let me refresh your memory from this thread.  Yeah when you misread one of my comments got fixated on me and just totally lost your shit? 


Well..I DID but you skirted around/didn't reply to the phosph...ate/ite PO3 bullshit I called you on (how do you suggest folks "make it")....or anything else I mentioned . . . well?  becoz YOU CANNOT
----
He can't "win" this debate coz he's talkin shit.
----
I just gave you a chance to actually refute my disagreements  BUT  you CANNOT....you DO NOT HAVE THE KNOWLEDGE!
----
 What details ASIDE from INCORRECT ones are you talking about?
----
I notice how you have reverted to argumentum ad hominem  BECOZ you CANNOT ANSWER MY QUESTIONS


55
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: January 24, 2013, 03:38 am »
I will answer that question: NO.
If motek was intelligent and driven enough to do any serious synthesis he would not have the attitude he does.  His confidence is not from experience but arrogance.  And that can be seen every time he starts talking chemistry, you can tell he is just poorly regurgitating things he read online, he is not speaking from experience.  Not to mention he is from Australia and the area he lives in has laws against owning a lab condenser!

Great, people get it, you can find gigabytes of drug synthesis info online for free.  In fact thats how most good chemists started.  There is a lot of outdated or just plain wrong information out there, especially in the LSD field. 

Thanks for your opinion but you are assuming all of my customers don't know that drug forums and hive backups exist.  They just weigh the pros and cons and decide that if they are going to enter this field as a beginner, a mere 10-20% of their start-up cost should go to getting around the clock consulting and a pre-written guide that is accurate and up to date.

You are insulting everyone intelligence acting like they are incapable of searching the internet.  Some peoples time is just valuable, unlike yours motek.


56
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: January 23, 2013, 08:50 pm »
BTW..you want "claviceps paspali"?  At this time of year in the sub tropics and higher, the Paspalum grass upon which C. Paspali grows as a furry black 'mold' on the seeds,  and after rain  when it's been damp, MOST of the grass will have mold on it...Claviceps Paspali mold

And ergotamine is probably most easily sourced via migraine pills which contains a few mgs of ergotamine salt in each one....but making LSD from ANY route is NO simple task, for ANYONE, even with a state of the art lab, I very much doubt  person without AT LEAST a good pass in chemistry in high school would get even close  :P


OK since this is the only chemistry related stuff you said in that whole post I will address it.

You CAN NOT use wild C. Paspali for producing ergolines.  You have to screen generations and generations of the fungi to get a producing strain. To do this you have to get a form of spores.  You can attempt to "fruit" the paspali sclerotia and get sexual spores or just use the condia in the asexual stage and hope for mutations.  Once you do have a producing strain there are stability issues. Wild claviceps produces something like .001g/L ergolines while the strain my source sells produces 1.5g/L.  So you are just flat out wrong.  Everything you say has such confidence behind it yet is so un-educated.  You want references?

Also, Clavieps Paspali does not look like a black fur on seeds.  Claviceps paspali spores germinate on the surface of paspalum grass seeds, press into them and take them over.  Claviceps paspali looks like a piece of popcorn overflowing from the seed husk.  They are yellow and produce red "honeydew" which contains spores.  The black fur he is talking about is part of the natural life cycle of paspalum grass.  You are so fucking confused man.

Migraine pills huh? What a waste of time.  Why don't you go ask your cool chemistry friends on the forums if they have ever done this before?

You keep saying im ducking your questions but if you look back at this thread history you will see that I tried to bring chemistry discussion to the table even when you were just talking shit.

Other than calling me out for me non-existentially mentioning "PO3" for like 3 pages, which turned out to be bullshit and you shut up real fast, what are your other questions/criticisms?

From here it just looks like you are blowing a lot of hot air and your ignorance shows through constantly.

57
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: January 20, 2013, 11:42 pm »
Quote from: motek

    "EVERYWHERE YOU LOOK THE VISIBLE SPECTRUM IS RAINBOWS11!!1 I LOVE RAINBOWS and JERKIN IT TO METHYL MAN WHEN HE RESPONDS TO MY PM, IM SO COOL BC I ONCE TALKED TO A DRUG CHEMIST ONLINE AND HE RESPONDED AND HE LIKED ME AND THOUGHT I WAS SO COOL SO FUCK EVERYONE ELSE."
   


58
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: January 20, 2013, 09:22 am »
Oh man so im not gona get to hear any more about all your friends online?

59
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: January 20, 2013, 08:51 am »
I only saw one question and then like 2 pages of you swinging your e-dick around and generally making yourself look like a 12 year old.  And talking about rainbows, who does that? What are they putting in your water?  8)


Is this your only question?:
Quote
EXACTLY WTF IS  "PO3" ???  phosphite? phos what? PO3 just DOESN'T EXIST! or do you ACTUALLY mean to say "POCL3 aka  Phosphoryl chloride?

I don't know where you saw PO3, because you are right it doesn't exist, you are either thinking of the SO3-DMF method or the POCl3 method of LSD synthesis.  Neither of which are included in my guide because they are inferior, except for the fact that POCl3 method does not require totally anhydrous lysergic acid, which allows you to skip the nerve wrecking vacuum drying step and just use hydrated lysergic acid.

60
Rumor mill / Re: Any drdeepwood/ ron paul succesfull synths?
« on: January 20, 2013, 08:36 am »
motek: So do you actually do any chemistry or do you just get a hard-on talking to those that do online?

You really seem to have something to prove, to a group of random strangers online none-the-less.  You are the kind of guy that could never do real work because he would run his mouth to everyone trying to impress folks.  I can smell your daddy issues from here.



Quote
PS...and now dr dickwood has gone to the trouble of FAKING a quote from me!!!   When/where did I write that about rainbows?

Your showing your true colors here doc.....as a LIAR and "plagiarist"
Unfuckinbelievable :P

OMG...

Pages: 1 2 3 [4] 5 6 ... 13